Saarland University
Lehrstuhl für Automatisierungstechnik

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> output.Log, What does the message mean ????
MOS701
post Feb 23 2009, 02:12 PM
Post #1


Member
**

Group: Members
Posts: 16
Joined: 11-February 09
Member No.: 30,419



Hi ,

I tried your solution, but i does not work also modelica did calculate some extra points but with some results like "NaN".

and the output log is

Error, simulation stopped at time: 1.12801e-09
Result written to file.
DASSL-- AT T (=R1) SOME ELEMENT OF WT
In above message, R1 = .1128008230713E-08
DASSL-- HAS BECOME .LE. 0.0
DASSL-- AT T (=R1) SOME ELEMENT OF WT
In above message, R1 = .1128008230713E-08
DASSL-- HAS BECOME .LE. 0.0
DASSL-- AT T (=R1) SOME ELEMENT OF WT
In above message, R1 = .1128008230713E-08
DASSL-- HAS BECOME .LE. 0.0

regards
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
adrpo
post Feb 23 2009, 01:31 PM
Post #2


Member
**

Group: Members
Posts: 11
Joined: 17-December 07
From: Linköping, Sweden
Member No.: 4,942




Hi,

The solver tolerance is set to 1e-10 which is quite hight,
so that might be the reason for the DASSL message.

Use:
simulate(Model, tolerance=1e-4)
or
buildModel(Model, tolerance=1e-4)
and see if this fixes the problem.

Cheers,
Adrian Pop/
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MOS701
post Feb 23 2009, 10:19 AM
Post #3


Member
**

Group: Members
Posts: 16
Joined: 11-February 09
Member No.: 30,419



Bonjour !!!

i am working on a Power diode model, and for now all my simulations are failed. sad.gif

so i have 2 questions.

1- the output file give le the following message :
Error, simulation stopped at time: 1.77213e-11
Result written to file.
DASSL-- AT CURRENT T (=R1) 500 STEPS
In above message, R1 = .1772132090176E-10
DASSL-- TAKEN ON THIS CALL BEFORE REACHING TOUT
""""

what does it mean ??

2- i am using a pulseVoltage source do i have to code a reel pulse voltage source with a rise time and so on ?? and with the presence of a physical pulse behavior do i reduce the hign non lineare phenomena that induce a non convergence and eventually a simulation failed message ???

3_ just a though tongue.gif do i need to post the code ??


Regards
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 22nd January 2019 - 01:21 PM